Step1
If you’re opening up a 360 you’re probably going to backup some games. so take the tub your spindle of discs came in (i used a 50 dvd-r tub by traxdata myself) and cut a bit from the side of it and put it over the console as shown. then mark out where the holes are…
… then make it into a key like this. the tabs need to be about 1cm long.
then do the same for the other side and you’ll get two xbox 360 case opening keys that look like these…
Step 2
open the front of the console as normal and put a bit of newspaper or something inside the case to hold the front open a bit, then insert the key, push with a bit of force and you should hear it click and the case will open….
… repeat for the other side and you’re done!
There, one open unmarked xbox 360!
next tutorial: how to crack the case and get inside
